Note: 

   

If you guys are getting coupon expired or course is not free after opening the link, then it is due to the fact that course instructors provide only few hundreds or thousands of slots which get exhausted. So, try to enroll in the course as soon as it is posted in the channel. The Coupons may expire any time for instant notification follow telegram channel

New customer offer! Top courses from $13.99 when you first visit Udemy

Learn how to design a digital circuit in the simplest way in the world of digital electronics

What you’ll learn

  • Digital Electronics
  • Digital Circuit Design
  • Digital Logic Design

    Description

    After completing this course, you’ll be able to

    1. Understand all the fundamentals of number systems and performing conversion between them.

    2. Function of logic circuits and how to design them.

    3. Classify Combinational Logic and Sequential Logic.

    4. How to design a combinational logic circuit for a given scenario with the minimum number of gates possible.

    5. Use all the standard techniques to minimize the logic gate requirements

    6. Design sequential logic circuits like Counters and Shift Registers using Flip flops.

    7. Understand the working of various flip flops and latches and highlight the difference between them.

    If you’re an aspirant who belong to the field of Computer Science, Electronics and Information Technology, Then this course will strongly build the foundations of the digital electronics in you.

    Objective of the course is to make everyone design a digital circuit efficiently using various components.

    Digital systems contain information that is represented as binary digits called bits.

    The alphabet of these bits is the set {0, 1}, which represents the logical value of the

    bits. The physical value is determined by the logic family being used. The transistor-transistor

    logic (TTL) family represents a logic 0 typically as + 0.2 volts and a logic 1

    typically as + 3.4 volts using a + 5 volt power supply; the emitter-coupled logic (ECL)

    100K family represents a logic 0 typically as – 1.7 volts and a logic 1 typically as –0.95

    volts using a – 4.5 volt power supply.

    Thus, a signal can be asserted either positive (plus) or negative (minus), depending

    upon the active condition of the signal at that point. The word positive, as used

    here, does not necessarily mean a positive voltage level, but merely the more positive

    of two voltage levels, as is the case for ECL.

    Who this course is for:

    • Beginner Electronics, CS and IT Aspirants